Buying guide
Best Pool Lounge Chairs 2026
As an Amazon Associate we earn from qualifying purchases. Our picks are researched from the manufacturers’ specifications and are our own editorial opinion.
On this page
Editor’s Choice
PURPLE LEAF Aluminum Pool Lounge Chair Set of 3
Two rust-resistant aluminum chaises with quick-drying Textilene slings and a side table, so a wet swimsuit never soaks a cushion.
-
Best in-pool lounge chair
Ledge Lounger Signature In-Pool Lounge Chairs Set of 2
Water-weighted UV20 resin chaises made in the USA for sun shelves up to 9 inches deep.
-
Best for tanning face down
Ostrich The Original Face-Down Tanning Pool Lounge Chair
A folding chaise with a face hole and arm slots that weighs about 9.5 lbs.
Pool lounge chairs live a harder life than other patio chairs. They get splashed with chlorine or salt water, sat on in wet swimsuits, baked in full sun, and dragged across the deck to follow the shade. The best pool lounge chairs dry fast, shrug off pool chemicals and never get hot enough to burn the backs of your legs. We compared eight in two groups: pool deck chaises in aluminum, HDPE and resin, and in-pool loungers built to sit on a tanning ledge or sun shelf. All the details come from the makers’ listings, and where a listing leaves a fact out, we say so.
Furnishing a patio rather than a pool deck? Our guide to the best outdoor chaise lounge chairs covers cushioned wicker and wood loungers, and our outdoor daybeds guide covers loungers for two.
Best Pool Lounge Chairs Comparison
| Product | PURPLE LEAF Set of 3 EDITOR’S CHOICE | THOEOE HDPE | EUNHOO Set of 4 | Ostrich Original | Ledge Lounger Signature | Aqua Outdoors 2-Pack | Floating Luxuries Kai | Step2 Vero Adirondack |
|---|---|---|---|---|---|---|---|---|
| Image |  |  |  |  |  |  |  |  |
| Price | $$ | $$ | $$ | $ | $$$ | $$$ | $$$ | $$ |
| Where | Deck | Deck | Deck | Deck or beach | In pool, up to 9" | In pool, up to 9" | In pool, up to 9" | In pool, up to 9", or deck |
| Material | Aluminum, Textilene sling | HDPE | Polypropylene resin | Steel frame, polyester | UV20 resin | UV16 resin (LDPE) | UV20+ rated material | UV20 resin |
| Pack | 2 chaises, 1 table | 1 chair | 4 chairs | 1 chaise | 2 chaises | 2 chaises | 2 chaises | 1 chair |
| Recline | 5 positions | 5 positions | 5 positions | 4 positions | Fixed | Fixed | Fixed | Fixed |
| Capacity | 265 lb | 450 lb | 450 lb | 250 lb | Not stated | Not stated | Not stated | 300 lb |
| Extras | Side table, stackable | Wheels, cup holder | Stackable | Face hole, carry strap | Stackable | Fills with water | Cup and phone holder, drain port | Fill cavity with sand |
| Made In | Not stated | Not stated | Not stated | Not stated | USA | USA | Not stated | Not stated |
| Availability | Shop Now at Amazon | Shop Now at Amazon | Shop Now at Amazon | Shop Now at Amazon | Shop Now at Amazon | Shop Now at Amazon | Shop Now at Amazon | Shop Now at Amazon |
EDITOR’S CHOICE
PURPLE LEAF Set of 3
- Price
- $$
- Where
- Deck
Show specificationsHide specifications
- Material
- Aluminum, Textilene sling
- Pack
- 2 chaises, 1 table
- Recline
- 5 positions
- Capacity
- 265 lb
- Extras
- Side table, stackable
- Made In
- Not stated
THOEOE HDPE
- Price
- $$
- Where
- Deck
Show specificationsHide specifications
- Material
- HDPE
- Pack
- 1 chair
- Recline
- 5 positions
- Capacity
- 450 lb
- Extras
- Wheels, cup holder
- Made In
- Not stated
EUNHOO Set of 4
- Price
- $$
- Where
- Deck
Show specificationsHide specifications
- Material
- Polypropylene resin
- Pack
- 4 chairs
- Recline
- 5 positions
- Capacity
- 450 lb
- Extras
- Stackable
- Made In
- Not stated
Ostrich Original
- Price
- $
- Where
- Deck or beach
Show specificationsHide specifications
- Material
- Steel frame, polyester
- Pack
- 1 chaise
- Recline
- 4 positions
- Capacity
- 250 lb
- Extras
- Face hole, carry strap
- Made In
- Not stated
Ledge Lounger Signature
- Price
- $$$
- Where
- In pool, up to 9"
Show specificationsHide specifications
- Material
- UV20 resin
- Pack
- 2 chaises
- Recline
- Fixed
- Capacity
- Not stated
- Extras
- Stackable
- Made In
- USA
Aqua Outdoors 2-Pack
- Price
- $$$
- Where
- In pool, up to 9"
Show specificationsHide specifications
- Material
- UV16 resin (LDPE)
- Pack
- 2 chaises
- Recline
- Fixed
- Capacity
- Not stated
- Extras
- Fills with water
- Made In
- USA
Floating Luxuries Kai
- Price
- $$$
- Where
- In pool, up to 9"
Show specificationsHide specifications
- Material
- UV20+ rated material
- Pack
- 2 chaises
- Recline
- Fixed
- Capacity
- Not stated
- Extras
- Cup and phone holder, drain port
- Made In
- Not stated
Step2 Vero Adirondack
- Price
- $$
- Where
- In pool, up to 9", or deck
Show specificationsHide specifications
- Material
- UV20 resin
- Pack
- 1 chair
- Recline
- Fixed
- Capacity
- 300 lb
- Extras
- Fill cavity with sand
- Made In
- Not stated
Pool Lounge Chair Reviews
Start with where the chair will sit. A pool deck chaise has to dry fast and stay cool. An in-pool lounger has to be heavy enough not to float away and tough enough to sit in treated water all season. We cover each group in turn.
Pool Deck Lounge Chairs
PURPLE LEAF Aluminum Pool Lounge Chair Set of 3
The PURPLE LEAF Patio Pool Lounge Chair Set of 3 is the set we would put beside most pools. You get two chaises and a side table. The frames are powder coated aluminum, so they do not rust when splashed, and the seats are UV-resistant Textilene, a coated mesh that drains and dries in minutes instead of holding water like foam.
Each chaise has an adjustable headrest, five recline angles, an S-curve backrest, and armrests that help you get up. They stack for storage, and PURPLE LEAF rates them for 265 lbs. The turquoise color suits a pool, and the open mesh does not get as hot as dark solid plastic.
✅ Pros
- Aluminum frames resist rust
- Quick-drying Textilene slings
- Table included
- Stackable for winter
❌ Cons
- 265 lb capacity is lower than HDPE models
- Sling can loosen over many seasons
Best For: Most pool decks, especially where people sit down still wet.
THOEOE Oversized HDPE Pool Lounge Chair with Wheels
The THOEOE Oversized HDPE Pool Lounge Chair is our pick for bigger adults. It is rated for 450 lbs, the highest figure on this page, and THOEOE calls it oversized to fit different body types. The body is solid HDPE that resists water, fading and stains, and the smooth non-porous surface wipes clean with a damp cloth.
Two built-in wheels let you roll it to follow the sun without lifting, and there is a cup holder for a drink, phone or sunscreen. It has five backrest positions and a 2-year assurance from the maker. White HDPE stays cooler than dark colors in full sun.
✅ Pros
- 450 lb capacity
- Wheels to follow the shade
- Cup holder
- 2-year assurance
❌ Cons
- Sold as a single chair
- Solid HDPE needs a towel or pad for long lounging
Best For: Larger users and anyone who wants one sturdy chair that cleans in seconds.
EUNHOO Resin Pool Lounge Chairs Set of 4
The EUNHOO Pool Lounge Chairs Set of 4 is our value pick for a family pool. Four chaises in one box is the cheapest way to line a pool deck. They are polypropylene resin that repels water and dries quickly, with cutouts that let air through and water drain off. EUNHOO lists each at 75" long by 22.5" wide, adjusting from 11.4" to 32.7" high, with a 450 lb capacity.
Each chair has five backrest positions and a lock that keeps the top from slipping. They are light enough for one person to carry and they stack, which makes them easy to clear for a pool party or the winter.
✅ Pros
- Four chaises in one box
- Quick-drying resin with drainage cutouts
- 450 lb capacity
- Light and stackable
❌ Cons
- Thinner plastic than HDPE
- Basic look
Best For: Families who need several pool lounge chairs on a budget.
Ostrich The Original Face-Down Tanning Pool Lounge Chair
The Ostrich The Original Chaise Lounge is our pick for tanning. It has a face hole and two arm openings, so you can lie face down and read or tan without twisting your neck. The backrest locks into four positions for when you turn over.
It weighs about 9.46 lbs, folds to under 4 inches thick, and has a carry strap, so it doubles as a beach chair. Opened, it measures 72" long, 22" wide and 12" high, with a powder coated steel frame and polyester fabric rated for 250 lbs. Ostrich advises letting the fabric air dry before storing, so it suits occasional pool days more than a chair left out all summer.
✅ Pros
- Face-down tanning design
- Folds flat and carries easily
- Lowest price tier here
- Also works at the beach
❌ Cons
- Steel frame, not aluminum
- Fabric should dry before storage
- 250 lb capacity
Best For: Sunbathers who want to tan face down, and pool owners who also visit the beach.
In-Pool Lounge Chairs for Tanning Ledges
In-pool loungers sit on a sun shelf or tanning ledge, the shallow step many new pools have. All four below are rated for water up to 9 inches deep. They stay put because you fill them with water or sand, so measure your shelf depth before you order.
Ledge Lounger Signature In-Pool Lounge Chairs Set of 2
The Ledge Lounger Signature Chaise is the in-pool lounge chair we would buy. It is made in the USA from UV20 resin, and Ledge Lounger says it is built to withstand sun, rain and wind for 10 or more years and is safe to leave in the pool all year. It works in salt water or chlorine pools, vinyl or fiberglass, on shelves up to 9 inches deep, with a Deep version for deeper ledges.
Setup is simple: remove the plug, fill it with water, submerge it, tilt it to release air and recline. The chaises stack, and Ledge Lounger sells matching tables and umbrellas. It is the most expensive set here, and the reason is the long life of the resin and the resort finish.
✅ Pros
- Made in the USA from UV20 resin
- Safe in salt and chlorine pools
- Can stay in the pool year round
- Deep version for deeper ledges
❌ Cons
- Highest price on this page
- Needs a sun shelf no deeper than 9 inches
Best For: Pools with a tanning ledge where the chairs will stay in the water all season.
Aqua Outdoors In-Pool Lounge Chairs 2-Pack
The Aqua Outdoors In-Pool Chaise 2-Pack is our mid-range in-pool pick. It is made in the USA by a Texas company from heavy-duty LDPE with UV16 resin protection. Once filled with water it will not float away, and Aqua Outdoors sells risers for ledges deeper than 9 inches.
To set it up, submerge the chair and rotate it until all the air bubbles are gone, then place it on the shelf. The sandstone granite finish hides water spots and looks like stone against a pool deck.
✅ Pros
- Made in the USA
- Risers available for deeper ledges
- Water-weighted
- Stone-look finish
❌ Cons
- UV16 rating is lower than UV20
- Still a premium price tier
Best For: Pool owners who want a US-made in-pool chaise for less than Ledge Lounger.
Floating Luxuries Kai In-Pool Lounge Chairs Set of 2
The Floating Luxuries Kai is our pick for built-in extras. It has a molded cup holder and phone holder, a drain port that flushes out water and dirt when you lift it out, and a 26.5-inch width that the maker calls true resort size. The material is rated UV20+, which Floating Luxuries describes as more than 20,000 hours of direct sun.
Floating Luxuries is clear that the standard Kai is only for shelves up to 9 inches deep, and sells a Kai Deep for 10 to 16 inches. It comes as a set of two in Arctic White.
✅ Pros
- Cup and phone holder built in
- Drain port for easy cleaning
- Wide 26.5-inch seat
- Deep version for 10 to 16 inches
❌ Cons
- Premium price tier
- Not for shelves deeper than 9 inches
Best For: People who want a drink and a phone within reach without a side table.
Step2 Vero In-Pool Adirondack Lounge Chair
The Step2 Vero Adirondack Chair is our budget in-pool pick. It is an Adirondack shaped lounger in fade-resistant resin made for chlorine and salt water, rated for 300 lbs and for pools up to 9 inches deep. You fill a built-in cavity with sand (not included) to stop it drifting.
It also works on the deck, so one chair can follow you in and out of the water. A groove on the back takes a pillow, cup holder or phone holder, sold separately. Step2 also makes a reclined Vero Pool Lounger if you prefer a chaise shape.
✅ Pros
- Lowest price for an in-pool chair
- Works in the pool or on the deck
- 300 lb capacity
- Accessory groove
❌ Cons
- Sand for the weight cavity not included
- Upright seat, not a full recline
Best For: Trying an in-pool chair before committing to a resort chaise.
How to Choose Pool Lounge Chairs
Materials That Handle Pool Water
Aluminum frames do not rust, which makes them the safest metal by a pool. HDPE and resin do not absorb water, so they are the right choice for the splash zone and the only choice for in-pool loungers. Textilene slings drain and dry fast. Cushions are comfortable but hold water and chlorine, so if you love them, pick ones made for outdoor use and bring them in at night. Our guides to outdoor cushions and whether patio furniture is waterproof explain the fabrics.
Heat in Full Sun
Dark solid plastic and bare metal can get uncomfortably hot by midday. White and light colors, mesh slings, and chairs with gaps for air all stay cooler. A towel on the seat is still the simplest fix, and an umbrella or shade sail turns a hot deck into a usable one.
Measuring a Tanning Ledge
Measure the water depth on the shelf in a few spots. Every in-pool chair here is rated for up to 9 inches. Deeper shelves need a deep model or risers. Check the shelf width too: two chaises need about 5 to 6 feet side by side.
Recline, Capacity and Storage
Five recline positions let you sit up to read and lie flat to nap. Check the stated capacity if you are a bigger adult, since figures here run from 250 to 450 lbs. Stackable chairs make winter storage and pool parties easier; see our guide on how to store patio furniture.
Caring for Pool Lounge Chairs
Rinse pool chairs with fresh water every week or two to remove chlorine and salt, then wash them with mild soap and a soft brush. Avoid bleach on slings and abrasive pads on resin. Before winter, drain in-pool loungers, rinse them and store them dry, unless the maker says they can stay in the water, as Ledge Lounger does. Our guide on how to clean patio furniture covers each material.
❓ Frequently Asked Questions
Conclusion
Decide deck or ledge first, then pick a material that dries fast and handles pool water. Add shade, because no chair is comfortable on a deck at 100°F. Our guides to the best cantilever umbrellas and best shade sails cover the two easiest ways to shade a pool deck.